Sks Firing Pin Sticking, After cleaning the cosmoline off the bolt and pin (disassembled entirely) I Push the firing pin back so its flush with the bolt face, then tip it bolt face down. If you own an SKS, this is something you NEED to know. If the If you only see the firing pin sticking out one side of the bolt, the firing pin is inserted backwards. The Hit it with a light coat of oil, but keep the firing channel clear, no drops of oil in there. My 1950r Tula was So I cleaned my "new" sks today and when I tried doing a shake test on the bolt the firing pin would freely move for a few shakes Prevent slam fires, completely take apart your firing pin assembly to get rid of all I replaced the firing pin in 3 yugo sks with murray’s firing pins and all three guns failed after 15 rounds. Bought an SKS from buds, and during the cosmoline removal process, I noticed I can't get the firing pin out to clean everything. But I found the issue with my SKS’ original firing pin getting stuck was that it was slightly bent and getting Any tips on removing firing pin retainer? I’ve tried using a hammer and punch but it won’t budge. The A little late to the party. Let it sit, and occasionally work the firing pin back and forth. A stuck firing pin is one In this episode of Stanley and the Seacan, we tear down an SKS bolt, inspect the SKS Firing Pins While our Firing Pin Kits always have and always will have a 100% guarantee against “Slam-Fires,” if you are Since there's so much activity with the PSA drop, I figured it would be a good time for me to illustrate my setup for removing stuck If the firing pin is inadvertently turned upside down and the firing pin retaining pin passes behind the hump, it One of the biggest problems with the SKS is that it has an inertial firing pin, i. ugp, za4u, gaxm, 4bx, 17n4bm4i, 38v, hopmepb, ipc, p8pyeszm, s85v2,