Need additional parts or accessories for your water storage tank? Not to worry; at Wright Tank, we have all of your water storage tank needs covered.
Check out some of the parts and accessories we carry below.
Fittings will allow the tank to connect to wells, pumps, sight tubes, valves, and any other devices you could have connected to your water tank. Fittings allow access to the water inside of the tank. Fittings range from ½” all the way up to 4″. For more information on the different devices you can connect to your fittings:
Couplings have threads on both the inside and the outside, allowing someone to connect devices on the inside of their tanks, such as float valves and float switches. Couplings range from ½” all the way up to 4″.
The vent on a tank allows air to enter the tank as the water goes out of the tank. A vent is required on all tanks that are getting an epoxy coating so that the epoxy can dry correctly.
This is a side manway that allows access to an empty tank.
This is a flange that handles 150 lbs. of liquid pressure.
A flange is another way of connecting pipes to your water storage tank.
Alarms and bells are used to tell when the water tank goes below the required fire flow water storage.
A hydrant wrench is used to open up a hydrant when a hose is attached.
A wharf head hydrant is used to gain access to water from the city. It is common for wharf heads to be installed in residential areas that had small water mains.
Used for fire protection and must be 14″ to 24″ above ground, has to be within 5’ of the roadway or driveway, and must be within 50-150’ of the structure.
These are for underground use to connect the water storage tank through the ground to devices such as fire hydrants.
